Just more ramblings of another IT Guy

Author Archives: Googs

Find and restart a process which is consuming high cpu/memory resources on Fortigate

Posted on 02/10/2012 by Googs

#config global #get sys perf top – This will display all the running processes in the Fortigate   #diag sys kill 11 <process-id> – Using the process ID from the above command you can restart a process using this command.

Posted in Tips+Tricks | Leave a comment

Free and easy screen sharing

Posted on 11/09/2012 by Googs

If you ever needed to share your screen while on the phone to somebody but don’t want the hassle of setting up a GoToMeeting, Teamviewer or Webex then check out Screenleap.   Screenleap allows you to share your screen without any sign-in … Continue reading →

Posted in Tips+Tricks | 1 Comment

Windows Update Error number: 0x8024400A

Posted on 17/08/2012 by Googs

After a fresh install of windows xp (from original recovery cd) the follwoing was encountered upon trying to run wndows updates ” The website has encountered a problem and cannot display the page you are trying to view. The options … Continue reading →

Posted in Tips+Tricks | Leave a comment

Guest NTLM access (CLI only)

Posted on 16/08/2012 by Googs

Guest profile access may be granted to users failing NTLM authentication, such as visitors who have no user credentials on the network. To allow guest users in NTLM, use the following CLI command: If there are multiple domains, a trust relation … Continue reading →

Posted in Fortigate, Tips+Tricks | Leave a comment

CLI commands to enable encryption between FortiGate and FortiAnalyzer

Posted on 10/07/2012 by Googs

Use the following commands to enable encryption between the FortiGate unit and the FortiAnalyzer unit: On the FortiGate unit: config log fortianalyzer setting set encrypt enable set psksecret <presharedkey_str> set localid <devname_str> end On the FortiAnalyzer unit: config log device edit … Continue reading →

Posted in FortiAnalyzer, Fortigate, Security, Tips+Tricks | Leave a comment

Output Apache access_log via syslog

Posted on 26/06/2012 by Googs

While I have not had the opportunity to test this yet Terry Burton of http://blog.terryburton.co.uk has a very simple solution to the issue of getting the Apache access_logs to be set via syslog. By default Apache only seems to support … Continue reading →

Posted in Handy Linux Commands, Tips+Tricks | Leave a comment

Wan Opt & Web Cache CLI only on certain Fortigates

Posted on 14/05/2012 by Googs

Wan Opt and Web Cache has gone CLI only for certain Fortigate models (See below) since Version 4 Mr3 Patch 4. The removal from the Web GUI is apparently for performance reasons. ask a nurse

Posted in Fortigate, Tips+Tricks | 3 Comments

Realtime upload of logs to FortiAnalyzer

Posted on 12/05/2012 by Googs

By default on Fortigate units with hard drives logs are only uploaded once a day. Units without a hard drive upload in realtime by default. If you would like a hard drive equipped Fortigate to upload logs in Realtime use … Continue reading →

Posted in Fortigate, Tips+Tricks | Leave a comment

FortiOS version 4 mr3 patch6 supported 3G modems

Posted on 11/05/2012 by Googs

Fortinet has published a list of the supported 3G modems for Version 4 MR3 Patch 6 and it can be found here

Posted in Fortigate, Tips+Tricks | Leave a comment

“Send on Behalf” doesn’t work for newly created user

Posted on 10/05/2012 by Googs

In the circumstance where you are trying to use the “send on behalf” feature of  a newly created user you may encounter the following error: “You do not have permission to send to this recipient. For assistance, contact your system … Continue reading →

Posted in Windows | Tagged , | Leave a comment